Twin exhaust stacks for 1/14 scale RC Trucks.
Designed for the Tamiya Volvo FH16 or Scania 770 to use their rear cab mount brackets for mounting the exhaust. But could also be used for any truck if your willing to drill holes in the back of the cab or by making up your own mounting bracket.
, Plain with no LED mounts, Plain with LED mounts, Scania Embossed and FH16 Embossed.
You can use 15mm Stainless tube for the Exhaust Tips as in the photos of the Volvo, or you can use the file provided to print exhaust stacks as in the Scania photos.
There is also a few options for the bottom exhaust cross, Either just the plain pipe, or the pipe with a plain heat shield, or the pipe with the heat shield with the bolts on it.
In the Rack there is x3 LED Mounts in the middle, small holes either side for either air lines or grab rails to be installed and also holes next to the Exhaust pipes for Grab rails to be made out of 1.5mm piano wire or similar (as in the Scania pics).
For the Scania 770 or Volvo FH16 there is no holes to drill, just replace the bolts holding the cab bracket for longer bolts as in sample picture. Put the bolts in from inside and hold the bracket to the cab with nylocks, then slide the Exhaust mount base onto the bolts and secure with more nylocks.
The base needs to be mounted to the truck first, then you assemble the rest of the Exhaust stacks all together prior to attaching it to the base.